BASIC CONCRETE DESIGN

CE 243                                                                                   No. of hrs/week : 04

                                                                                                No. of credits  : 04

Elements of RCC:

Role of reinforcement, behaviour of RCC section. Straight line Theory- Assumptions, determination of Neutral axis, determination of stress and strain due to bending moment – Singly reinforced and doubly reinforced sections. 10 hrs

Cracked Section, determination of short term and long term deflections of R.C. beams, determination of Crack width. 06 hrs

Limit state method, principle of limit state method of design, characteristic loads, characteristic strength, partial safety factors, stress strain characteristics for concrete and steel. 03 hrs

Introduction to stress block parameters for collapse, limit state of serviceability.  03 hrs

Limit state method of design of beams- Design of rectangular beams (singly and doubly reinforced), flanged beams, design for shear and torsion. 10 hrs

Limit State Design of one way and two way slabs for various boundary conditions, Design of Flat Slabs. 07 hrs

Limit State of Collapse in compression, Design of axially loaded short R.C. columns, uniaxial and Biaxial bending – using SP16 hand book. Design of footing – loads on foundation – Design basis (limit state method) 11 hrs

REFERENCE BOOKS

1. Shah H.J. “ Reinforced Concrete” Vol I, Charotar Publishing house.

2. Sinha N.C. and Roy S.K “ Fundamental of Reinforced Concrete” S. Chand and company.

3. Shah N.L. and Karve S.R. “ Illustrated reinforced concrete Design” structures Publishers.

4. Karve S.R and Shah V.L. “ Limit State Thory and design of reinforced concrete”.

5. Jain A.K. “ Reinforced Concrete- limit state design”.

6. IS 456-2000 code of practice for plain and reinforced concrete.

7. SP-16-1980 Design Aids for Reinforced Concrete IS 456-1978